Setup Procedures for 3.x

Software Installation
This install guide does not show each window that is displayed during the installation.
  Read each of the windows during the installation process. They are very informative.

1.  Make sure you're in Windows with no programs running.  Insert the Jong.com Software Installer 
	Disk One into your floppy drive.  Select the File menu and select "Run".  A window will 
	pop up and in this window type "A:\setup" and click the OK button. 
     ***Note:  If by chance your floppy drive is not setup as an "A" drive
 	then substitute the appropriate letter, i.e. B:\setup.  Read the Internet Explorer 
	
	License Agreement if you wish and click the I Accept button to continue with the 
	installation. Next you will see a window welcoming you to the Microsoft Internet Explorer
	2.1 to continue, click OK and follow the instructions on the screen throughout the 
	installation.

2.  At this window choose "Complete".  If you are familiar with the Internet and wish to install 
	either the dialer or the browser seprately you can do so by choosing Custom.

3.  Make sure that Don't detect my modem is not checked.  This will let the software 
	automatically detect your modem.  Note:  If the software is not able to automatically 
	detect your modem then you may choose the Standard 14000 or Standard 28000    
               modem or whichever applies to your modem.

4.   You will be asked for your area code and a whether or not you have to dial a number to dial 
	out (common in offices with many phone lines).  Note:  If you need to enter a number to 
	dial out then make sure that you also place a comma after the number.  This tells the
	modem to pause before dialing the phone number.


Connection Setup

Now that your software is installed, you need to setup the dialer with a connection to Jong.com.
	Once setup properly, connecting to Jong.com is just a double click away.

5.  Double click on the New Connection icon.  The Create New Connection window will show   
               and ask you for a connection name.  We recommend that you name the new
               connection Jong.com. 

6.  At this window you enter your account information as specified to you when you signed up.  
	Don't forget to temporarily disable call waiting by entering your disable code 
	(usually "*70" or "*71") and a comma before the phone number.  Call your local phone 
	service provider for that code.  An example would look like this:  "*70,282-0070" not 
	including the quotation marks. Internet Access.  Follow along with the on screen 
	instructions.

7.  Next click on the Properties button and click the Domain Name tab to show this dialog
                window	(shown below).  This dialog window is where you will tell the dialer what server 
	to use after your user name has been authenticated with your password (as setup in
                step6..

You will need to fill in the Domain Name and the Primary and Secondary DNS fields.
	Also, the Server assigned IP address option should be selected, as shown.  After
                entering these, click OK to get back to the Connect To window shown in step 6.  At this
                point you can click on the Connect button to connect to Jong.com and from this point on, 
                you can double	click on this newly create connection to connect to our internet servers.

Once the connection is successfully established you can use whatever Internet software you wish, such as a web browser or email software.

Happy Surfing!